DMX-PUTZER is just the thing for Live control of DMX Spotlights and Fixtures.
Using just a few DMX Fixtures? DMX-PUTZER is the Only DMX Controller you’ll need!
The Buttons on the DMX-PUTZER change the Values in 12 Registers called ‘Putzer-Channels’
These Putzer-Channels can be Mapped Anywhere in the First 90 DMX-Channels.
Putzer-Channels can be used multiple times in different DMX-Channels, Inverted and Non-Inverted.
DMX-Channels Not being Directly Controlled by Putzer-Channels can be set to Static Values of 0 or 255.
Most DMX Moving Head Spotlights have many DMX ‘Control’ Channels.
However, basic operations such as ‘Pan & Tilt’ and Color or ‘Gobo’ control, requires only 3 ‘Active’ Channels.
The other control channels can be Set to Values of 0 or 255, and then not changed.
With the DMX-PUTZER, you could use –
The ‘Triangle’ Button to Tilt-Up.
The ‘X’ Button to Tilt-Down.
The ‘Square’ Button to Pan-Left.
The ‘Circle’ Button to Pan-Right.
The two Right-Front Buttons for Color or Gobo control.
An additional Spotlight could be operated using the similar Buttons on the Left side the DMX-PUTZER.
Pressing the ‘SELECT’ Button gives access to a 2nd Set of 6 Putzer-Channels.
Press the ‘START’ Button and the Buttons Operate the 1st Set of 6 Putzer-Channels again.
DMX-PUTZER Outputs 90 DMX Channels, so several Fixtures with Many control channels can be operated at the same time.
The Regulated, 5V Switching Power Supply Included with the DMX-PUTZER allows Input voltages from 90 to 240 VAC 50/60Hz for U.S. & Overseas Use, with plug adapter.
Note: Two AA Batteries required for the Wireless Hand-Held Control Pad, Not Included.
Free 1st Class Shipping & tracking within USA. Overseas Shipment $20